Snowflake Maker

Cut shapes out of a folded paper wedge and watch them repeat into a six-armed paper snowflake. Download it as an SVG or PNG, or print a template and cut the real thing. Everything runs in your browser, and your design is never uploaded or saved.

1. Cut the folded paper

Cut tool

Tap or click to place corners, then tap the first point or press Finish cut. With the wedge focused, Enter finishes, Backspace removes a point and Escape cancels. Both straight edges are folds. Cutting past the paper is fine: the cut is trimmed to the wedge.

2. Unfolded snowflake

5 cuts. The snowflake holds together in one piece.

3. Download or print

Image background

How to use the snowflake maker

  1. Start from a design (Classic, Star or Lace), press Random snowflake, or Clear for blank paper.
  2. Pick Polygon to place corners one tap at a time, or Freehand to drag a shape. Each cut goes through all 12 layers, so the preview shows it 12 times.
  3. Undo and Redo step through your changes. A cut that strays outside the wedge is trimmed to its edge and the tool says so; a cut entirely outside it is rejected.
  4. Download an SVG for cutting machines and editing, a 1024×1024 PNG with a transparent or white background, or print the one-page cutting template.

How to fold paper into sixths

  1. Cut a circle about 8 inches (20 cm) across, or start with a square sheet.
  2. Fold it in half to make a semicircle (or a rectangle from the square).
  3. Fold the half into thirds: bring one side over to cover a third, then fold the other side on top, so the edges line up and you have a 60° wedge.
  4. Fold that wedge in half once more along its centre. This last fold is what makes the arms mirror-symmetric, like the wedge in the tool.
  5. If you started with a square, trim the top into an arc so the snowflake comes out round.

Cutting tips

  • Use thin paper. Twelve layers of printer paper are hard to cut cleanly; tissue or origami paper is easier.
  • Small sharp scissors give crisper corners. Cut the small interior shapes first, the outline last.
  • Leave paper along at least part of each fold. A cut from one fold all the way to the other splits the snowflake into rings; the tool counts the pieces so you can see it before you cut.
  • Press the unfolded snowflake under a heavy book overnight to flatten it.

Worked example

Load Classic. It has three triangular notches cut into the folds and one cut across the open edge. Each notch on a fold edge opens into a diamond when unfolded, because the fold mirrors it. The cut at the edge turns the round outline into six pointed arms. Add a small polygon in the middle of the wedge and it appears 12 times, two per arm, mirrored.

Now draw a band from one fold to the other. The status line reports that the design falls apart into 2 pieces: the outer ring and the centre. The tool keeps your cut and shows both pieces, so undo it if you want a snowflake that holds together.

Why real snowflakes have six arms

When water freezes, its molecules lock into a hexagonal lattice, so the smallest ice crystal is a tiny six-sided prism. A snowflake grows from that seed as water vapour freezes onto it, and the corners grow fastest. All six arms travel through the same air at the same time, so they meet the same temperature and humidity and grow in near-matching patterns.

Folding paper into twelfths copies that symmetry exactly: six rotations, each with a mirror image. That is why this tool uses a 30° wedge rather than a quarter or an eighth, which would make four- or eight-pointed shapes no real snowflake has.

Frequently asked questions

How do you fold paper to make a six-pointed snowflake?
Fold a circle or square in half, fold the half into thirds so you have a 60° wedge, then fold that wedge in half once more. The 30° wedge you end up with has 12 layers, so every cut is repeated 12 times when you unfold it.
Why do real snowflakes have six arms?
Water molecules freeze into a hexagonal crystal lattice. A snowflake grows outward from that hexagonal seed, and because all six corners see nearly the same air, the arms grow in step and look alike.
What happens if a cut splits the snowflake apart?
The tool keeps the cut exactly as drawn and tells you how many separate pieces the design has. The preview and downloads still show every piece; on real paper the loose pieces would fall out when you unfold it.
Can I print a template and cut it out by hand?
Yes. Print template gives you one page with the folded wedge at true size (a 4 inch radius) and your cuts marked in grey. Fold your paper, line it up with the wedge and cut away the grey shapes.
Is my design saved or uploaded?
No. The design lives only in this browser tab. It is not uploaded, not put in the URL and not saved, so reloading the page starts over.

Related